Saab 9-3 Key Replacement Tools To Ease Your Everyday Life

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to take to add an additional key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new car key and transponder are required to be purchased and then programmed into the car.

Rotate your keys to prevent one from wearing out faster than the next. This will keep your keys in pristine condition.

Replacement Case

Contrary to the classic Saab keys of old keys, the new key fobs contain electronics that make it difficult to copy. This has made theft of cars significantly more difficult than it was just a few years ago. However, it has made replacing lost keys an incredibly costly endeavor.

Saab 9-3 owners should have two keys working. If one gets lost, it costs a lot of money to add another to the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers will typically charge $100-$200 for this.

There are options to avoid the high cost. Certain parts suppliers will utilize the code of a spare key to cut a brand new metal blade at a fraction that of a dealer. The key must be the exact same as the original in order for it to function in your vehicle.

Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. With the screwdriver, slowly break the plastic and remove the emergency key from the case. Once you have the case open, remove the electronic components and place them inside the new case. Place the key with the correct badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video by Cyclone Cyd demonstrates how to replace the battery of the remote fob with just four simple steps. This tutorial is compatible with any modern Saab key fob. However, the process could differ slightly.

The first step is to find the button that opens the backup key on the fob. The button is usually found on the back of your fob, just below the Saab Logo. Next use the flathead screwdriver to insert into the tiny hole in this button. This should be enough to unlock the fob's case so that you can replace the battery.

After the new battery CR1632 is in place, you can reassemble the remote key fob and program it to your car. The whole process should not be more than an hour. This is a very easy procedure that doesn't require special tools.

The process can be a bit more complicated if you lose your key, but still possible. The dealer will first need to read the VIN of the vehicle, and then purchase an additional TWICE module and key blade with the correct unique code. After that, they'll be required to cut the replacement key and then program it with a new software tool called MDI.

Key Replacement Fob

The key fob is the piece that locks and unlocks your car. It is equipped with a battery inside. Batteries have a finite lifespan and eventually die. This is a typical issue that occurs with all vehicles and the good news is that you can change the batteries in many key fobs and not have to replace the whole case. Amazon sells replacement fobs with all the electronic components in place. It is easy to open the case and replace the batteries. It's important to note that you'll need take out the emergency key first. you can do this by inserting an incredibly small screwdriver with a flat head into the slot located in the middle of the case. The case should split when you rotate the screwdriver around it.

If you're about to replace the keys ensure that you have a spare, as this can reduce your total cost by a significant amount. If  replacement saab 9-3 key  do have a spare, you can ask the dealer to cut an additional key and program it to your car, which is much cheaper than replacing the entire key fob.

If you don't have a spare you can add an additional key to your car, but this will require a lot of research and effort. The cost for adding a second key is about a few hundred dollars and also requires programming of the car's computer. This can be done by a professional, however it is an expensive option for the majority of owners.

Replacement Ignition

Unlike the earlier Saab cars, the modern SAAB 9-3 models have an upgraded alarm system that is based on a coded key. This means that in the event that you lose your only working key, adding another one can be very expensive since the car has to have a computer module installed, and it must also be specifically programmed to accept an extra key. The majority of locksmiths aren't able to do this, and even dealers can charge several hundred dollars to program the new key!

If you've lost your sole working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and they will charge you a premium price for it. Instead we can reprogram the EEPROM in your current car computer to allow it to be programmed for a replacement key, and save you over 50% of the price you have to pay at a dealership.

If you've owned a car like the SAAB 9-3 for many years you're aware that the ignition keys aren't very durable. If your ignition key is not working properly, you should think about replacing it. They can become extremely sticky and the buttons are known to fall off. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done in a short time with the right tools.